Cayer AF2451 Professional Video Camera Tripod 67 inches with Fluid Drag Head, 4-Section Compact Aluminimum DSLR Tripod Convertible to Monopod for DSLR Camera, Video Camcorder, Plus 1 Extra QR Plate

Cayer AF2451 - The cayer af2451 aluminum tripod with H4 Fluid Pan Head supports up to 13. 2 lb, measures 25. 6" when folded, and can rise to a maximum height of 67. 4" with its rapid center column fully raised. Working Height: 67. 4" / 171cm Min. Specifications】: limited 8-year warranty | 13. 2 lb load capacity | 25. 6" to 67. 4" height range | tilt angle +90° / -70° | 360° panning | 60mm ball Diameter | Carrying Bag | Fluid Head | Tripod Leg | 2 Plates in total.

. Profectional multi use】: with 180° upward-folding legs, easily converts to a monopod by combining the center column with the detachable tripod leg; reversible center volumn or short split-column especially ideal for macro and close-up photography. H4 fluid head - separate pan and tilt lock levers, a built-in bubble level indicator - Interchangeable Pan Bar allows both right and left-handed use ※ SPEC: Panning Range: 360° Friction Control: Fixed Load Capacity: 13.

Cayer AF2451 Professional Video Camera Tripod 67 inches with Fluid Drag Head, 4-Section Compact Aluminimum DSLR Tripod Convertible to Monopod for DSLR Camera, Video Camcorder, Plus 1 Extra QR Plate - 2 lbs / 6 kgs Flat Base: 2. 36" / 60mm weight: 1. 9 lbs / 085 kg camera mounting screws: 1/4" ; a spare 3/8" screw ★ af2451 tripod leg - ergonomic quick-snap locks for quick setup - integral leveling patform tilts 15° in any direction and provides fine leveling control on the vertical center column - A hook under the center column allows you to hang a counterweight for further stability - Easily converts to a monopod by combining the center column with the removable tripod leg - Especially ideal for macro and close-up photography with the reversible center volumn or short split-column ※ SPEC: Leg Sections: 4 Reverse-Folding Legs: Yes Max.

Working Height: 24.

More information about Cayer AF2451

SMALLRIG Camera Base Plate with Rod Rail Clamp for Sony FS7, for Sony A7 Series, for Canon C100/C300/C500, for Panasonic GH5-1674

SMALLRIG 1674 - It attaches to the camera via a 3/8"-16 or 1/4"-20 screw. It attaches to a camera with a 3/8"-16 or 1/4"-20 screw. The base plate features 15mm diameter and 60mm spaced rod holes that allows you to mount a follow focus, matte box, lens support or other accessories. It is specifically designed to keep the weight down and let the operator use the FS7's inbuilt shoulder pad, minimizing the amount of extra weight and gear needed for a rig.

With 1/4''-20 & 3/8''-16 threads on bottom, this base plate can be attached to any tripod. Smallrig multipurpose u-base 1674 smallrig multipurpose u-base 1674 is a simple and light base plate exclusively for Sony FS7, for Canon C100/C300/C500/C700, Sony A7 series, for Panasonic GH5/GH3/GH4 etc. The base plate features 15mm diameter and 60mm spaced rod holes, which enables the mounting of follow focus, matte box, lens support or other accessories.

SMALLRIG Camera Base Plate with Rod Rail Clamp for Sony FS7, for Sony A7 Series, for Canon C100/C300/C500, for Panasonic GH5-1674 - 1. 3. It is equipped with 1/4''-20 and 3/8''-16 threaded holes at the bottom to attach quick release plate for tripod. Compatibility: for sony fs7, for sony a7 series, for canon c100/c300/c500, sony a7 series, for canon c100/c300/c500/c700package includes: 1 x base plate 1 x 1/4'' fixing screw 1 x 3/8'' fixing screw 2 x 1/4''-20 Screw 1 x Hex SpannerProduct Dimensions: 80x43x26 mmNet Weight: 171gPackage Size: 120x100x40mmMaterials: Aluminum Alloy This low profile base plate is a simple and light base plate for the current popular cameras, such as for Sony FS7, for Panasonic GH3/GH4/GH5 etc.

More information about SMALLRIG 1674


Similar products:


SMALLRIG BMPCC 4K Cage for Blackmagic Design Pocket Cinema Camera 4K w/Cold Shoe, NATO Rail - 2203

SMALLRIG 2203A-AU - A dedicated full cage for BMPCC 4K 2. Compatible with smallrig mount for samsung t5 ssd 2245, for canon c100/c300/c500, such as for sony fs7, hdmi & ssd cable clamp 2246 and metabones adapter support 2247 compatibility:for blackmagic design pocket cinema camera 4K Package Includes: 1 x BMPCC 4K Cage 3 x 1/4 Screw 1 x Hex Spanner 1 x Plate with Locating Pins Product Dimensions: 192 x 115 x 75mm Net Weight: 300g Materials: Aluminum Alloy This low profile base plate is a simple and light base plate for the current popular cameras, Sony A7 series, for Panasonic GH3/GH4/GH5 etc.

Perfect protection】secure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting. Rubber pads on the bottom protect your camera body from scratching. Securely locked by 1/4''-20 screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting 5.

SMALLRIG BMPCC 4K Cage for Blackmagic Design Pocket Cinema Camera 4K w/Cold Shoe, NATO Rail - 2203 - . Mounting smallrig side Handle - 2187 for hand-held shooting. It attaches to a camera with a 3/8"-16 or 1/4"-20 screw. The base plate features 15mm diameter and 60mm spaced rod holes that allows you to mount a follow focus, matte box, lens support or other accessories. It is specifically designed to keep the weight down and let the operator use the FS7's inbuilt shoulder pad, minimizing the amount of extra weight and gear needed for a rig.

With 1/4''-20 & 3/8''-16 threads on bottom, this base plate can be attached to any tripod.

More information about SMALLRIG 2203A-AU


Similar products:


Rode VideoMic Pro+ Compact Directional On-Camera Shotgun Condenser Microphone

Rode VMPRPLUS - Rode vmprplus videomic pro-R+ On-Camera Shotgun Condenser Microphone. It attaches to a camera with a 3/8"-16 or 1/4"-20 screw. The base plate features 15mm diameter and 60mm spaced rod holes that allows you to mount a follow focus, matte box, lens support or other accessories. It is specifically designed to keep the weight down and let the operator use the FS7's inbuilt shoulder pad, minimizing the amount of extra weight and gear needed for a rig.

With 1/4''-20 & 3/8''-16 threads on bottom, this base plate can be attached to any tripod. High customization】smallrig bmpcc cage is specifically designed for blackmagic design pocket cinema Camera 4K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot.

Rode VideoMic Pro+ Compact Directional On-Camera Shotgun Condenser Microphone - Dual mono unbalanced output this low profile base plate is a simple and light base plate for the current popular cameras, such as for Sony FS7, for Canon C100/C300/C500, Sony A7 series, for Panasonic GH3/GH4/GH5 etc. For better setup, "smallrig lens adatper support for metabones 2247" and "smallRig HDMI cable clamp 2246", please search "SmallRig Mount for Samsung T5 SSD 2245", which are exclusively designed for BMPCC 4K.

Ensure you buy geniune rØde products! products from sellers which say 'fulfilled by Amazon' under the price are NOT authorized resellers, and may not be selling genuine product. Buy only from amazon. Com labelled 'shipped and sold by Amazon. Com'.

More information about Rode VMPRPLUS


Similar products:


SMALLRIG Cold Shoe Extension Outrigger Hot Shoe Mount Adapter for Microphone, EVF and Camera Accessories - 2044

SMALLRIG 4332298919 - Mutiple moutings】this cage comes with multiple mounting points, allow you to attach more accessories, such as 1/4'' & 3/8'' threaded holes, like microphone or smallrig Articulating Arm - 2070, cold shoe and 3/8'' locating holes for ARRI standard, etc. Nato rail】features built-in nato rail that allows you to quickly release accessories with NATO clamp.

. For better setup, "smallrig lens adatper support for metabones 2247" and "smallRig HDMI cable clamp 2246", please search "SmallRig Mount for Samsung T5 SSD 2245", which are exclusively designed for BMPCC 4K. Ensure you buy geniune rØde products! products from sellers which say 'fulfilled by Amazon' under the price are NOT authorized resellers, and may not be selling genuine product.

SMALLRIG Cold Shoe Extension Outrigger Hot Shoe Mount Adapter for Microphone, EVF and Camera Accessories - 2044 - Buy only from amazon. Com labelled 'shipped and sold by Amazon. Com'. It could be used on djI Ronin S or Zhiyun Crane 2 gimbal stabilizer. It attaches to a camera with a 3/8"-16 or 1/4"-20 screw. The base plate features 15mm diameter and 60mm spaced rod holes that allows you to mount a follow focus, matte box, lens support or other accessories.

It is specifically designed to keep the weight down and let the operator use the FS7's inbuilt shoulder pad, minimizing the amount of extra weight and gear needed for a rig. With 1/4''-20 & 3/8''-16 threads on bottom, this base plate can be attached to any tripod.

More information about SMALLRIG 4332298919


Similar products:


2061 - SMALLRIG 15mm Railblock Rod Clamp with 1/4"-20 Thread for 15mm DSLR Camera Cage Shoulder Rig

SMALLRIG Railblock - Can be powered by the rØde lb-1 lithium-ion Rechargeable Battery, 2 x AA Batteries or continuously via Micro USB. Smallrig super lightweight 15mm-Railblock 2061 includes 2pcs of super lightweight 15mm-Railblock. Each super lightweight 15mm-railblock-3 comes with two rod clamps for 15mm rods, which could be tightened via 2 rotatable wingnuts.

The adjustment of one wingnut will not affect the operation of the other wingnut. In addition, it is equipped with an abundance of 1/4'' threaded holes for DIY operations. It includes a 1/4'' counter bore slot and a cold shoe. It attaches to a camera with a 3/8"-16 or 1/4"-20 screw. The base plate features 15mm diameter and 60mm spaced rod holes that allows you to mount a follow focus, matte box, lens support or other accessories.

2061 - SMALLRIG 15mm Railblock Rod Clamp with 1/4"-20 Thread for 15mm DSLR Camera Cage Shoulder Rig - It is specifically designed to keep the weight down and let the operator use the FS7's inbuilt shoulder pad, minimizing the amount of extra weight and gear needed for a rig. With 1/4''-20 & 3/8''-16 threads on bottom, this base plate can be attached to any tripod. High customization】smallrig bmpcc cage is specifically designed for blackmagic design pocket cinema Camera 4K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot.

The 1/2" condenser capsule provides broadcast-quality audio via a 3. 5mm connector with an incredibly low self-noise of just 14db. Featured recommendations】compatible with ronin s and crane 2.

More information about SMALLRIG Railblock


Similar products:


Powerextra 2 Pack Replacement Sony NP-F970 Battery and Smart LCD Display Dual USB Charger for Sony NP-F930 NP-F950 NP-F960 Battery and Sony CCD-SC55, TR516, TR716, TR818, TR910, TR917

Powerextra - 1/4'' counter bore slot could be mounted on the 1/4'' threaded holes on the right side of Cage for Sony A6500 1889. The arrowheads on the cold shoe point to anti-off direction. The cold shoe is compatible with RODE microphone, wireless microphone and RODE SVMX microphone. The cold shoe extends beyond the cage, thus it will not block the buttons and ports of the cage.

Materials: Aluminum Alloy. Smallrig super lightweight 15mm-Railblock 2061 includes 2pcs of super lightweight 15mm-Railblock. Each super lightweight 15mm-railblock-3 comes with two rod clamps for 15mm rods, which could be tightened via 2 rotatable wingnuts. The adjustment of one wingnut will not affect the operation of the other wingnut.

Powerextra 2 Pack Replacement Sony NP-F970 Battery and Smart LCD Display Dual USB Charger for Sony NP-F930 NP-F950 NP-F960 Battery and Sony CCD-SC55, TR516, TR716, TR818, TR910, TR917 - In addition, it is equipped with an abundance of 1/4'' threaded holes for DIY operations. Upgraded li-ion rechargeable battery 7. 4v 8800mah, ultra-high capacity replacement battery for Sony NP-F970, NP-F950, NP-F930, NP-F960 . Charger: 8. 4v/08a output, charge 2 batteries at the same time. Mutiple moutings】this cage comes with multiple mounting points, like microphone or smallrig Articulating Arm - 2070, cold shoe and 3/8'' locating holes for ARRI standard, such as 1/4'' & 3/8'' threaded holes, allow you to attach more accessories, etc.

More information about Powerextra


Similar products:


PANASONIC LUMIX G LEICA DG SUMMILUX Lens, 25mm, F1.4 ASPH, Mirrorless Micro Four Thirds, H-X025 USA Black

Panasonic H-H025K - Filter thread - for greater creative control this lens offers a 46mm thread mount for polarizer and other options lens filters. This low profile base plate is a simple and light base plate for the current popular cameras, for Canon C100/C300/C500, such as for Sony FS7, Sony A7 series, for Panasonic GH3/GH4/GH5 etc.

This is the original leica dg summilux lens that became a must-have for any LUMIX G series mirrorless Micro Four Thirds photographer, because of its clean optical sharpness and the unique soft-focusing background effect it can generate. Featured recommendations】compatible with ronin s and crane 2. The F1.

PANASONIC LUMIX G LEICA DG SUMMILUX Lens, 25mm, F1.4 ASPH, Mirrorless Micro Four Thirds, H-X025 USA Black - 4 aperture provides for super bright light gathering under difficult low light conditions while the Panasonic Nano Surface Coating nearly eliminates common ghosting and flaring that can accompany wide open aperture photography. Mounting smallrig side Handle - 2187 for hand-held shooting. Perfect protection】secure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting.

1/4'' counter bore slot could be mounted on the 1/4'' threaded holes on the right side of Cage for Sony A6500 1889. The arrowheads on the cold shoe point to anti-off direction. The cold shoe is compatible with RODE microphone, wireless microphone and RODE SVMX microphone. The cold shoe extends beyond the cage, thus it will not block the buttons and ports of the cage.

More information about Panasonic H-H025K


Similar products:


NP-F550 RAVPower Battery Charger for Sony NP F970, F750, F770, F960, F550, F530, F330, F570, CCD-SC55, TR516, TR716, TR818, TR910, TR917 and more 2-Pack Replacement Battery Kit, Dual Slot Charger

RAVPower CA-RP-BC006-023 - Mutiple moutings】this cage comes with multiple mounting points, such as 1/4'' & 3/8'' threaded holes, allow you to attach more accessories, like microphone or smallrig Articulating Arm - 2070, cold shoe and 3/8'' locating holes for ARRI standard, etc. Nato rail】features built-in nato rail that allows you to quickly release accessories with NATO clamp.

Featured recommendations】compatible with ronin s and crane 2. A true shotgun microphone designed for camcorders, DSLR cameras and portable audio recorders as primary and reference audio. The 1/2" condenser capsule provides broadcast-quality audio via a 3. 5mm connector with an incredibly low self-noise of just 14db.

For better setup, "smallrig lens adatper support for metabones 2247" and "smallRig HDMI cable clamp 2246", please search "SmallRig Mount for Samsung T5 SSD 2245", which are exclusively designed for BMPCC 4K. Ensure you buy geniune rØde products! products from sellers which say 'fulfilled by Amazon' under the price are NOT authorized resellers, and may not be selling genuine product.

NP-F550 RAVPower Battery Charger for Sony NP F970, F750, F770, F960, F550, F530, F330, F570, CCD-SC55, TR516, TR716, TR818, TR910, TR917 and more 2-Pack Replacement Battery Kit, Dual Slot Charger - Buy only from amazon. Com labelled 'shipped and sold by Amazon. Com'. Rapid charger. 100% compatible with the sony dcr-vx2100, hdr-fx1000, fdr-ax1, dsr-pd170, hvr-hd1000u, hvl-lbpb, nex-fs100u, nex-ea50UH, hxr-mc2000u, mvc-fdr1, hdr-ax2000, hdr-fx1, hdr-fx7, hvr-v1u, dsr-pd150, hvr-z1u, hvr-z1p, NEX-FS700U Handycam Camcorder.

More information about RAVPower CA-RP-BC006-023


Similar products:


SMALLRIG Cold Shoe Mount Adapter Bracket Hot Shoe with 1/4" Thread for Camera Cage Flash LED Moniter, Pack of 2-2060

SMALLRIG 4332041552 - The 1/2" condenser capsule provides broadcast-quality audio via a 3. 5mm connector with an incredibly low self-noise of just 14db. Rapid charger. 100% compatible with the sony dcr-vx2100, hdr-fx1, dsr-pd170, hvr-z1u, hvr-z1p, hdr-fx1000, hxr-mc2000u, nex-fs100u, hdr-fx7, fdr-ax1, hdr-ax2000, hvr-hd1000u, dsr-pd150, nex-ea50UH, mvc-fdr1, hvl-lbpb, hvr-v1u, NEX-FS700U Handycam Camcorder.

Convenience and easy to recharge your np-f970 battery with USB cable by power bank on the go. Package include: 2*replacement np-f970 batteries, 1* 1M micro USB cable, 1*smart usb charger, 1* MicroFiber Cleaning Cloth. Leica dg quality - leica dg mirrorless micro four thirds lenses provide the ultimate in optical quality and performance.

SMALLRIG Cold Shoe Mount Adapter Bracket Hot Shoe with 1/4" Thread for Camera Cage Flash LED Moniter, Pack of 2-2060 - It could be used on djI Ronin S or Zhiyun Crane 2 gimbal stabilizer. For better setup, "smallrig lens adatper support for metabones 2247" and "smallRig HDMI cable clamp 2246", please search "SmallRig Mount for Samsung T5 SSD 2245", which are exclusively designed for BMPCC 4K. Ensure you buy geniune rØde products! products from sellers which say 'fulfilled by Amazon' under the price are NOT authorized resellers, and may not be selling genuine product.

Buy only from amazon. Com labelled 'shipped and sold by Amazon. Com'. Such as cage for sony a6500 a6300 a6500, such as cage, cold shoe block, cage for panasonic gh5 gh4 gh3, etc.

More information about SMALLRIG 4332041552


Similar products:


SanDisk Extreme Pro MicroSDXC UHS-I U3 A2 V30 64GB + Adapter

SanDisk SDSQXCY-064G-GN6MA - Such as cage for sony a6500 a6300 a6500, cage for panasonic gh5 gh4 gh3, cold shoe block, such as cage, etc. The counter bore hole in the center is attachable to a 1/4'' screw, but the 1/4'' screw will not touch the hot shoe contact of accessories mounted on the cold shoe. There comes with two secure bending bevels on the one end to prevent accidental removal.

Elevated compatibility: drastically increases runtime of your Sony cameras, including NX5 / TRV1 / TRV3 and TRV9E /46E / 49E series see the description for the full compatibility list. Secure construction, over voltage, over discharge, Reliable Charging: Features overcharge, and overheating protections, short circuit, as well as a fire-resistant build.

SanDisk Extreme Pro MicroSDXC UHS-I U3 A2 V30 64GB + Adapter - Smallrig cold shoe 2pcs pack 2060 could be mounted on any camera accessories with 1/4" and M2. 5 threaded holes, handle and plate etc. Perfect protection】secure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting. Get extreme speeds for Fast transfer, app performance, and 4K UHD.

Featured recommendations】compatible with ronin s and crane 2. Smallrig super lightweight 15mm-Railblock 2061 includes 2pcs of super lightweight 15mm-Railblock. Each super lightweight 15mm-railblock-3 comes with two rod clamps for 15mm rods, which could be tightened via 2 rotatable wingnuts. The adjustment of one wingnut will not affect the operation of the other wingnut.

More information about SanDisk SDSQXCY-064G-GN6MA


Similar products: