Nanuk 935 Waterproof Hard Case with Wheels and Foam Insert for Sony Mirrorless Cameras and Lenses – Graphite

Two powerclaw patented triple action latches molded in super-tough Nylon keep the case securely closed using compressive force. Designed for mobility with a 2-stage retractable pull handle with quick release button and smooth rolling polyurethane wheels; Temperature range: Min -20°F -29°C | Max 140°F 60°C.

Waterproof impact resistant conditional lifetime guarantee crushproof dustproof Powerclaw latching system Soft grip foldable handle Lightweight NK-7 resin Padlockable 100% stainless steel hardware High performance gasket Automatic pressure release valve Molded-in bezel system Integrated lid stay Stackable Meets airline carry-on regulations Exterior Dimensions - 22.

0" x 14. 0" x 9. 0" interior Dimensions - 205" x 11. 3" x 7. 5" the nanuk 935 case with wheels is approved by the faa as the maximum carry-on size - interior dimensions L205" x w11. Waterproof ip67 rated, dustproof, shockproof | Automatic purge valve equalizes pressure on the inside of the case when travelling.

Nk-7 resin is incredibly impact resistant | NANUK cases are designed to survive the toughest journey | Limited lifetime warranty. 3" x h 7. 5" | exterior Dimensions L22.

Lid Organizer for The Nanuk 935 Case.

Perfect compliment to your divider set, TrekPak insert, foam set, or to your empty case. Dims - 19. 50" x 1075". Lid organizer to fit the Nanuk 935 Case. Fits the Nanuk 935. This organizer has zippered pouches. This lid organizer allows you to maximize the space in your Nanuk 935. Usually ships within 1 working day from San Diego, CA.

Screws into lid. Approx.


Similar products:
Nanuk 935 Waterproof Carry-On Hard Case with Wheels Empty - Black
Nanuk TSA Powerclaw Latch Retrofit Kit - Works with Nanuk Case Sizes 908 918 920 925 933 935 940 945 950 & 960
Nanuk 935 Waterproof Carry-On Hard Case with Wheels and Foam Insert - Black
New Grey Padded Divider Set & Lid Foam to fit Nanuk 935.
Nanuk 935 Waterproof Carry-On Hard Case with Wheels Empty - Graphite
Nanuk 935 Waterproof Carry-On Hard Case with Wheels and Foam Insert - Orange
Padded Divider for 935 Nanuk Case
Nanuk 935 Waterproof Hard Case with Wheels and Foam Insert for Sony Mirrorless Cameras and Lenses - Graphite
Nanuk Neoprene Adjustable Shoulder Strap with Closed AirCell Cushioning for Cases and Messenger Bags and Briefcases
Nanuk 935 Waterproof Carry-On Hard Case with Wheels and Padded Divider - Black


Nanuk TSA Powerclaw Latch Retrofit Kit - Works with Nanuk Case Sizes 908 918 920 925 933 935 940 945 950 & 960

Our tsa latch keys are coded to the lock. Reinforced nylon construction: our TSA latches are manufactured using ultra-tough nylon resin combined with added structural reinforcement for increased strength and security. Usually ships within 1 working day from San Diego, CA. Add lockable security to your Nanuk case with this TSA latch retrofit kit.

Each kit contains: 2x tsa power claw latches, 4x installation pins 2x short, 2x coded TSA keys, 2x long. Each lock has a special code tsa001 to tsa003, which is used by the TSA, CATSA and other security agencies to know which secure tool to use to open the lock. This code is required in the event of lost keys that need to be replaced.

We found a way to make our patented Power Claw latches even better! They are now available with an integrated TSA accepted key lock. Travel sentry red diamond logo: nanuk tsa Power Claw latches bear the travel sentry red diamond logo indicating to security personnel that the case can be opened for inspection during travel using the appropriate keys.

Screws into lid. Approx. The easy to install retrofit kit can be installed on many NANUK cases and adds another layer of security to your case. Compatible with the following nanuk cases: 908 | 918 | 920 | 925 | 933 | 935 | 940 | 945 | 950 | 960 each kit contains: 2x tsa power claw latches2x Coded TSA keys4x installation pins 2x short, 2x long Lid organizer to fit the Nanuk 935 Case.




Similar products:
Lid Organizer for The Nanuk 935 Case.
Nanuk 935 Waterproof Carry-On Hard Case with Wheels Empty - Black
Nanuk TSA Approved Case Lock
Nanuk 935 Waterproof Carry-On Hard Case with Wheels and Foam Insert - Black
Nanuk Lid Organizer for 935 Nanuk Case
Nanuk 935 Waterproof Carry-On Hard Case with Wheels Empty - Graphite
Nanuk Neoprene Adjustable Shoulder Strap with Closed AirCell Cushioning for Cases and Messenger Bags and Briefcases
Nanuk 935 Waterproof Hard Case with Wheels and Foam Insert for Sony Mirrorless Cameras and Lenses - Graphite
Nanuk 950 Waterproof Hard Case with Wheels and Foam Insert - Black
New Grey Padded Divider Set & Lid Foam to fit Nanuk 935.


Nanuk Neoprene Adjustable Shoulder Strap with Closed AirCell Cushioning for Cases and Messenger Bags and Briefcases

For longer trips, or simply to enhance comfort and ease-of-use, consider the NANUK Shoulder Strap. Usually ships within 1 working day from San Diego, CA. Add lockable security to your Nanuk case with this TSA latch retrofit kit. Compatible with the following nanuk cases: 908 | 918 | 920 | 925 | 933 | 935 | 940 | 945 | 950 | 960

Screws into lid. Approx. Travel sentry red diamond logo: nanuk tsa Power Claw latches bear the travel sentry red diamond logo indicating to security personnel that the case can be opened for inspection during travel using the appropriate keys. Dims - 19. 50" x 1075". Reinforced nylon construction: our TSA latches are manufactured using ultra-tough nylon resin combined with added structural reinforcement for increased strength and security.

Each kit contains: 2x tsa power claw latches, 4x installation pins 2x short, 2x coded TSA keys, 2x long. Aircell technology uses multiple sealed air chambers along the surface of the strap to absorb and dampen the load as you walk. Typically clamps right to your case or bag without any further modifications.

Top grade materials will provide you with years of use and comfort. Your bag or case will always feel safe and secure, no more worries of slipping or unlatching.


Similar products:
Lid Organizer for The Nanuk 935 Case.
Nanuk 910 Waterproof Hard Case with Foam Insert - Black
Nanuk TSA Powerclaw Latch Retrofit Kit - Works with Nanuk Case Sizes 908 918 920 925 933 935 940 945 950 & 960
Nanuk 920 Waterproof Hard Case with Foam Insert - Black - Made in Canada
OP/TECH USA S.O.S. Curve Strap (Black)
Nanuk 915 Waterproof Hard Case with Foam Insert - Black - Made in Canada
Nanuk 935 Waterproof Carry-On Hard Case with Wheels Empty - Black
Nanuk 935 Waterproof Carry-On Hard Case with Wheels and Foam Insert - Orange
Nanuk 915 Waterproof Hard Case with Foam Insert - Orange - Made in Canada
Nanuk 935 Waterproof Carry-On Hard Case with Wheels and Foam Insert - Black


New Grey Padded Divider Set & Lid Foam to fit Nanuk 935.

Each kit contains: 2x tsa power claw latches, 2x coded TSA keys, 4x installation pins 2x short, 2x long. Aircell technology uses multiple sealed air chambers along the surface of the strap to absorb and dampen the load as you walk. Typically clamps right to your case or bag without any further modifications.

Top grade materials will provide you with years of use and comfort. Your bag or case will always feel safe and secure, no more worries of slipping or unlatching. 100% satisfaction guaranteed - We'll Make Sure You Are Completely Satisfied. Screws into lid. Approx. Compatible with the following nanuk cases: 908 | 918 | 920 | 925 | 933 | 935 | 940 | 945 | 950 | 960

Dividers and lid foam only. Fits nanuk 935 - approx dims of dividers - 205″ x 11. 3″ x 5. 4". Lid organizer to fit the Nanuk 935 Case. Fits the Nanuk 935. This organizer has zippered pouches.


Similar products:
Nanuk 935 Waterproof Carry-On Hard Case with Wheels Empty - Black
Lid Organizer for The Nanuk 935 Case.
Nanuk Lid Organizer for 935 Nanuk Case
Nanuk 935 Waterproof Carry-On Hard Case with Wheels and Foam Insert - Black
Nanuk 935 Waterproof Carry-On Hard Case with Wheels Empty - Graphite
Nanuk TSA Powerclaw Latch Retrofit Kit - Works with Nanuk Case Sizes 908 918 920 925 933 935 940 945 950 & 960
Nanuk 935 Waterproof Carry-On Hard Case with Wheels and Foam Insert - Orange
Nanuk 935 Waterproof Hard Case with Wheels and Foam Insert for Sony Mirrorless Cameras and Lenses - Graphite
Nanuk 935 Waterproof Carry-On Hard Case with Wheels Empty - Silver
SMALLRIG BMPCC 4K & 6K Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K w/Cold Shoe, NATO Rail - 2203


Manfrotto 290 Xtra Aluminum 3-Section Tripod MT290XTA3US

290 xtra has become more flexible thanks to the new 4 leg angle positions that allow photographers to be much more creative. Robust aluminum construction. Screws into lid. Approx. Dims - 19. 50" x 1075". 4 leg angles. Compatible with the following nanuk cases: 908 | 918 | 920 | 925 | 933 | 935 | 940 | 945 | 950 | 960

Travel sentry red diamond logo: nanuk tsa Power Claw latches bear the travel sentry red diamond logo indicating to security personnel that the case can be opened for inspection during travel using the appropriate keys. 290 xtra is the link between past and future: it’s still the classic rock-solid 290 tripod but it features new style and technical functions.

Each kit contains: 2x tsa power claw latches, 4x installation pins 2x short, 2x coded TSA keys, 2x long. Aircell technology uses multiple sealed air chambers along the surface of the strap to absorb and dampen the load as you walk. Typically clamps right to your case or bag without any further modifications.

Top grade materials will provide you with years of use and comfort. Your bag or case will always feel safe and secure, no more worries of slipping or unlatching. 100% satisfaction guaranteed - We'll Make Sure You Are Completely Satisfied. Lid organizer to fit the Nanuk 935 Case.


Similar products:
Desmond DAC-60 60mm QR Clamp 3/8" w 1/4" Adapter & Level Arca-Swiss Compatible for Tripod Head Quick Release
3 Legged Thing Dual Stage Naked Switch clamp v2 with Adaptable Plate for Left and Right Hand use
Nanuk 930 Waterproof Hard Case with Foam Insert - Black
Morjava DC-38Q Aluminum Quick Release Plate Clamp Compatible with Arca Swiss for 38mm QR Plate
Aluminium 50mm QR Clamp 3/8" w 1/4" Adapter & Level Arca-Swiss Compatible for Tripod Head Quick Release
Aluminum DC-38Q Screw Knob Clamp Arca Swiss Compatible for Tripod Ballhead & 3 Strap Bosses
Manfrotto 502 Video Head MVH502AH
Nanuk 930 Waterproof Hard Case with Foam Insert - Silver
Manfrotto MVH500AH Flat Base Pro Fluid Head (Black)
Moveski Aluminum Quick Release Clamp and Quick Release Plate 1/4" & 3/8" Screw Hole Compatible for Arca Swiss


Padded Divider for 935 Nanuk Case

Dims - 19. 50" x 1075". Usually ships within 1 working day from San Diego, CA. Add lockable security to your Nanuk case with this TSA latch retrofit kit. Specific for case model 935. Reinforced nylon construction: our TSA latches are manufactured using ultra-tough nylon resin combined with added structural reinforcement for increased strength and security.

Screws into lid. Approx. Compatible with the following nanuk cases: 908 | 918 | 920 | 925 | 933 | 935 | 940 | 945 | 950 | 960 Each kit contains: 2x tsa power claw latches, 2x coded TSA keys, 4x installation pins 2x short, 2x long. Aircell technology uses multiple sealed air chambers along the surface of the strap to absorb and dampen the load as you walk.

Typically clamps right to your case or bag without any further modifications. Top grade materials will provide you with years of use and comfort. Your bag or case will always feel safe and secure, no more worries of slipping or unlatching. 100% satisfaction guaranteed - We'll Make Sure You Are Completely Satisfied.

Dividers and lid foam only. Fits nanuk 935 - approx dims of dividers - 205″ x 11.


Similar products:
Lid Organizer for The Nanuk 935 Case.
Nanuk 935 Waterproof Carry-On Hard Case with Wheels Empty - Black
Nanuk 935 Waterproof Carry-On Hard Case with Wheels Empty - Graphite
Nanuk 935 Waterproof Carry-On Hard Case with Wheels and Foam Insert - Black
Nanuk 935 Waterproof Carry-On Hard Case with Wheels Empty - Silver
Nanuk 935 Waterproof Carry-On Hard Case with Wheels and Foam Insert - Orange
Nanuk 935 Waterproof Carry-On Hard Case with Wheels and Foam Insert - Olive
Nanuk TSA Powerclaw Latch Retrofit Kit - Works with Nanuk Case Sizes 908 918 920 925 933 935 940 945 950 & 960
Nanuk 935 Waterproof Carry-On Hard Case with Wheels Empty - Orange
Nanuk 935 Waterproof Hard Case with Wheels and Foam Insert for Sony Mirrorless Cameras and Lenses - Graphite


Foam Inserts 3 Part for 935 Nanuk Case - Made in Canada

Premium Italian design. Specific for case model 935. Reinforced nylon construction: our TSA latches are manufactured using ultra-tough nylon resin combined with added structural reinforcement for increased strength and security. Robust aluminum construction. Screws into lid. Approx. Pelican grey padded divider set to fit Nanuk 935.

Foam Insert. Travel sentry red diamond logo: nanuk tsa Power Claw latches bear the travel sentry red diamond logo indicating to security personnel that the case can be opened for inspection during travel using the appropriate keys. Dims - 19. 50" x 1075". Adjustable aluminum Leg Locks. Usually ships within 1 working day from San Diego, CA.

Add lockable security to your Nanuk case with this TSA latch retrofit kit. Automatic pressure release valve. Multilayer cubed foam. Dividers and lid foam only. Fits nanuk 935 - approx dims of dividers - 20


Similar products:
Nanuk 935 Waterproof Carry-On Hard Case with Wheels Empty - Black
Lid Organizer for The Nanuk 935 Case.
Nanuk 935 Waterproof Hard Case with Wheels and Foam Insert for Sony Mirrorless Cameras and Lenses - Graphite
Nanuk 935 Waterproof Carry-On Hard Case with Wheels and Foam Insert - Black
SMALLRIG Top Handle Grip Cheese Handle with Cold Shoe Mount for Digital DSLR Camera - 1638
Nanuk 935 Waterproof Carry-On Hard Case with Wheels and Foam Insert - Orange
Nanuk Neoprene Adjustable Shoulder Strap with Closed AirCell Cushioning for Cases and Messenger Bags and Briefcases
Nanuk 935 Waterproof Carry-On Hard Case with Wheels and Foam Insert - Silver


SMALLRIG SSD Mount Bracket SSD Holder for Samsung T5 SSD, Compatible with SMALLRIG Cage for BMPCC 4K & 6K- 2245

Foam Insert. Compability: for blackmagic design pocket cinema camera 4k & 6k cage 2203 for Samsung T5 SSD Package Includes: 1 x SSD Mount 1 x Hex Spanner 2 x M4 Screw Product Dimensions: 72. 5 x 49 x 26. 6mm net weight: 58g materials: Aluminum Alloy Lid organizer to fit the Nanuk 935 Case. Fits the Nanuk 935.

This organizer has zippered pouches. Specific for case model 935. 4 leg angles. Each kit contains: 2x tsa power claw latches, 4x installation pins 2x short, 2x coded TSA keys, 2x long. Aircell technology uses multiple sealed air chambers along the surface of the strap to absorb and dampen the load as you walk.

Typically clamps right to your case or bag without any further modifications. Top grade materials will provide you with years of use and comfort. Your bag or case will always feel safe and secure, no more worries of slipping or unlatching. 100% satisfaction guaranteed - We'll Make Sure You Are Completely Satisfied.

Adjustable aluminum Leg Locks. Divider Insert. Usually ships within 1 working day from San Diego, CA. Add lockable security to your Nanuk case with this TSA latch retrofit kit.


Similar products:
SMALLRIG BMPCC 4K & 6K Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K w/Cold Shoe, NATO Rail - 2203
SMALLRIG HDMI and USB-C Cable Clamp for BMPCC 4K Cage - 2246
SMALLRIG BMPCC 4K/6K Half Cage Compatible with Blackmagic Pocket Cinema Camera 4K/6K, Half Cage with Anti-Twist Mechanism and Built-in NATO Rails - 2254
SMALLRIG Camera Base Plate with Rod Rail Clamp for Sony FS7, for Sony A7 Series, for Canon C100/C300/C500, for Panasonic GH5-1674
Blackmagic Design Pocket Cinema Camera 4K
SMALLRIG V-Lock Assembly Kit Female V-Dock Male V-Lock Quick Release Plate - 1846
SMALLRIG NATO Rail Handle, Top Handgrip with Mounting Points, Cold Shoe Mount for Camcorder Camera Cage - 1955
SMALLRIG Super Lightweight 15mm Railblock with 1/4"-20 Thread for RED and Other 15mm DSLR Camera Rig - 942
Alvin's Cables BMPCC 4K to D Tap Power Cable for Blackmagic Pocket Cinema Camera 4K Gold Mount V Mount Battery Weipu 2 Pin Female to P Tap
SMALLRIG Top Handle Grip Cheese Handle with Cold Shoe Mount for Digital DSLR Camera - 1638


2203 - SMALLRIG BMPCC 4K & 6K Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K w/Cold Shoe, NATO Rail

The wingnuts on the top are designed to tighten the mount bracket and USB-C cable. High quality】made by aluminum alloy, sturdy and durable. Each kit contains: 2x tsa power claw latches, 2x coded TSA keys, 4x installation pins 2x short, 2x long. Aircell technology uses multiple sealed air chambers along the surface of the strap to absorb and dampen the load as you walk.

Typically clamps right to your case or bag without any further modifications. Top grade materials will provide you with years of use and comfort. Your bag or case will always feel safe and secure, no more worries of slipping or unlatching. 100% satisfaction guaranteed - We'll Make Sure You Are Completely Satisfied.

Travel sentry red diamond logo: nanuk tsa Power Claw latches bear the travel sentry red diamond logo indicating to security personnel that the case can be opened for inspection during travel using the appropriate keys. Multiple mounting interfaces nato rails, 1/4''-20 and 3/8''-16 threaded holes, locating holes for ARRI standard and cold shoe for accessories 3.

Specific for case model 935. Rubber pads on the bottom protect your camera body from scratching. 4 leg angles. Robust aluminum construction. High customization】the ssd mount can help you stablize the samsung t5 ssd when you use the BMPCC 4K & 6K camera equipped with SMALLRIG BMPCC 4K & 6K cage.


Similar products:
SMALLRIG SSD Mount Bracket SSD Holder for Samsung T5 SSD, Compatible with SMALLRIG Cage for BMPCC 4K & 6K- 2245
SMALLRIG HDMI and USB-C Cable Clamp for BMPCC 4K Cage - 2246
Blackmagic Design Pocket Cinema Camera 4K
SMALLRIG V-Lock Assembly Kit Female V-Dock Male V-Lock Quick Release Plate - 1846
SMALLRIG Camera Base Plate with Rod Rail Clamp for Sony FS7, for Sony A7 Series, for Canon C100/C300/C500, for Panasonic GH5-1674
SMALLRIG Top Handle Grip with Locating Point for Arri, Adjustable Camera Handle with Mounting Points, Shoe Mount for Video Camera Cages, LED Lights Microphones- 1984
SMALLRIG NATO Handle Wooden Handgrip for BMPCC 4K & 6K and Z-CAM E2, Compatible with Samsung T5 SSD - HSN2270
SMALLRIG NATO Rail Handle, Top Handgrip with Mounting Points, Cold Shoe Mount for Camcorder Camera Cage - 1955
SMALLRIG Lens Mount Adapter Support for Metabones, Compatible with BMPCC 4K Cage - 2247
SMALLRIG Super Lightweight 15mm Railblock with 1/4"-20 Thread for RED and Other 15mm DSLR Camera Rig - 942


2246 - SMALLRIG HDMI and USB-C Cable Clamp for BMPCC 4K Cage

Pelican grey padded divider set to fit Nanuk 935. Installation】secure tightly on the cage via 2 m4 screws. Secure tightly with two 1/4'' screws. What you get】 friendly 24-hour customer support, 30-day No-hassle Return Service, Worry-free 2-year Warranty. Premium Italian design. Adjustable aluminum Leg Locks.

The cable protector is used to prevent hdmi&usb-C cable from being collision or broken, make data transmission more stable. It's significant for DSLR/camcorder shooters to capture audio/video. High customization】the ssd mount can help you stablize the samsung t5 ssd when you use the BMPCC 4K & 6K camera equipped with SMALLRIG BMPCC 4K & 6K cage.

Dims - 19. 50" x 1075". Lightweight】weighs only 58g. Please note】the cable clamp may block plug-in and plug-out of the power cord, we suggest take the clamp completely off when you want to remove the power cord. Rubber pads on the bottom protect your camera body from scratching. 4 leg angles. Firmly hold your cable in place while plugging into your camera.

.


Similar products:
SMALLRIG SSD Mount Bracket SSD Holder for Samsung T5 SSD, Compatible with SMALLRIG Cage for BMPCC 4K & 6K- 2245
SMALLRIG BMPCC 4K & 6K Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K w/Cold Shoe, NATO Rail - 2203
SMALLRIG Lens Mount Adapter Support for Metabones, Compatible with BMPCC 4K Cage - 2247
SMALLRIG Camera Base Plate with Rod Rail Clamp for Sony FS7, for Sony A7 Series, for Canon C100/C300/C500, for Panasonic GH5-1674
SMALLRIG V-Lock Assembly Kit Female V-Dock Male V-Lock Quick Release Plate - 1846
SMALLRIG Super Lightweight 15mm Railblock with 1/4"-20 Thread for RED and Other 15mm DSLR Camera Rig - 942
SMALLRIG Monitor Mount EVF Holder Support with Locating Pins for ARRI Standard - 2174
SMALLRIG Top Handle Grip with Locating Point for Arri, Adjustable Camera Handle with Mounting Points, Shoe Mount for Video Camera Cages, LED Lights Microphones- 1984
SMALLRIG NATO Handle Wooden Handgrip for BMPCC 4K & 6K and Z-CAM E2, Compatible with Samsung T5 SSD - HSN2270
SMALLRIG BMPCC 4K/6K Half Cage Compatible with Blackmagic Pocket Cinema Camera 4K/6K, Half Cage with Anti-Twist Mechanism and Built-in NATO Rails - 2254