PFC 120-080-038-5SF Plastic Carrying Case, 12″ x 8″ x 3 3/4″, Black

The Plastic Forming Company (PFC) 120-080-038-5SF - Flat layered foam cushion in the bottom and convoluted cushion in the lid. Made in USA. Used in a variety of applications, their open interior design can be used as-is or with the included foam interior. Like all of the plastic cases pfc makes, PFC Stock Cases are blow molded from recyclable high-density polyethylene HDPE.

Pfc stock cases will never rust or corrode. And pfc’s scratch resistant Mold-Tech exterior finishes will always look new, even after years of hard use. Textured exteriors resist dents, cracking and scuffs. Pfc stock cases incorporate patented mechanical hinges and latches – the industry standard. The #1 solution when you need a simple, rugged case.

PFC 120-080-038-5SF Plastic Carrying Case, 12" x 8" x 3 3/4", Black - Pfc stock cases are the perfect solution when you need a simple, rugged carrying case. Their color is molded in, peal, so it can never chip, or rub off. Why? because no other material even comes close when it comes to impact strength even in the coldest weather, resistance to solvents and oils and durability.

Interior dimensions 11" x 7" x 3 7/16".

More information about The Plastic Forming Company (PFC) 120-080-038-5SF

PFC 135-100-044-5SF Plastic Carrying Case, 13 1/2" x 10" x 4 3/8", Black

The Plastic Forming Company (PFC) 135-100-044-5SF - And pfc’s scratch resistant Mold-Tech exterior finishes will always look new, even after years of hard use. Pfc stock cases are the perfect solution when you need a simple, rugged carrying case. The #1 solution when you need a simple, rugged case. Made in USA. Interior dimensions 12 1/2" x 9" x 4 1/32". Pfc stock cases will never rust or corrode.

Why? because no other material even comes close when it comes to impact strength even in the coldest weather, resistance to solvents and oils and durability. Flat layered foam cushion in the bottom and convoluted cushion in the lid. Their color is molded in, peal, so it can never chip, or rub off. Used in a variety of applications, their open interior design can be used as-is or with the included foam interior.

PFC 135-100-044-5SF Plastic Carrying Case, 13 1/2" x 10" x 4 3/8", Black - Like all of the plastic cases pfc makes, PFC Stock Cases are blow molded from recyclable high-density polyethylene HDPE. Textured exteriors resist dents, cracking and scuffs. Pfc stock cases incorporate patented mechanical hinges and latches – the industry standard.

More information about The Plastic Forming Company (PFC) 135-100-044-5SF


Similar products:


PFC 150-110-044-5SF Plastic Carrying Case, 15" x 11" x 4 3/8", Black

The Plastic Forming Company (PFC) 150-110-044-5SF - Pfc stock cases incorporate patented mechanical hinges and latches – the industry standard. Used in a variety of applications, their open interior design can be used as-is or with the included foam interior. Like all of the plastic cases pfc makes, PFC Stock Cases are blow molded from recyclable high-density polyethylene HDPE.

Interior dimensions 12 1/2" x 9" x 4 1/32". Textured exteriors resist dents, cracking and scuffs. Made in USA. Flat layered foam cushion in the bottom and convoluted cushion in the lid. Flat layered foam cushion in the bottom and convoluted cushion in the lid. Interior dimensions 12 1/2" x 9" x 4 1/32". Textured exteriors resist dents, cracking and scuffs.

PFC 150-110-044-5SF Plastic Carrying Case, 15" x 11" x 4 3/8", Black - Pfc stock cases are the perfect solution when you need a simple, rugged carrying case. And pfc’s scratch resistant Mold-Tech exterior finishes will always look new, even after years of hard use. Made in USA. Their color is molded in, peal, so it can never chip, or rub off. Pfc stock cases will never rust or corrode.

More information about The Plastic Forming Company (PFC) 150-110-044-5SF


Similar products:


17"x12"x3" - Universal Hand Tool Blow Molded Carrying Case - Protect Tools, Photography, and Testing Equipment - TP-CASEPPF - True Position Tools - Kaizen Pluck & Pull Foam Insert

True Position Tools - Outer dimensions 17"x12"x3" / Inner Dimensions 16"x9-3/4"x2. Protect tools and equipment with this rigid plastic carrying case. Customizable Kaizen pluck and pull foam insert for added versatility. The #1 solution when you need a simple, rugged case. Interior dimensions 12 1/2" x 9" x 4 1/32". Made in USA. Flat layered foam cushion in the bottom and convoluted cushion in the lid.

Outer dimensions 17" x 12" x 3" inner dimensions 16" x 9-3/4" x 2" Made in USA. The #1 solution when you need a simple, rugged case. Includes kaizen inner pluck & pull foam diced in 3/4" increments for custom fitment of assorted hand tools. Textured exteriors resist dents, cracking and scuffs. Stainless steel clasps for added durability.

17"x12"x3" - Universal Hand Tool Blow Molded Carrying Case - Protect Tools, Photography, and Testing Equipment - TP-CASEPPF - True Position Tools - Kaizen Pluck & Pull Foam Insert - Durable plastic carrying case part # TP-CASEPPF-L with stainless steel clasps. Flat layered foam cushion in the bottom and convoluted cushion in the lid. Textured exteriors resist dents, cracking and scuffs. Interior dimensions 12 1/2" x 9" x 4 1/32".

More information about True Position Tools


Similar products:


Blow Molded BudCase

Cases By Source B1173 - Flat layered foam cushion in the bottom and convoluted cushion in the lid. Interior dimensions 12 1/2" x 9" x 4 1/32". Plastic hinge. High Density Polyethylene. Made in USA. Protect tools and equipment with this rigid plastic carrying case. Stainless steel clasps for added durability. The #1 solution when you need a simple, rugged case.

. Customizable Kaizen pluck and pull foam insert for added versatility. 1 latch. Made in USA. Flat layered foam cushion in the bottom and convoluted cushion in the lid. Folding handle. Economically priced for protection, storage and reuse. Interior dimensions 12 1/2" x 9" x 4 1/32". Textured exteriors resist dents, cracking and scuffs.

Blow Molded BudCase - They're rustproof, dent-proof and scratch resistant. Textured exteriors resist dents, cracking and scuffs. This series offers lightweight blow molded polyethylene cases HDPE that are virtually unbreakable, tolerate high and low temperatures, and resist chemicals. The #1 solution when you need a simple, rugged case.

Interior splits: 2.

More information about Cases By Source B1173


Similar products:


Blow Molded BudCase

Cases By Source B753 - Textured exteriors resist dents, cracking and scuffs. Stainless steel clasps for added durability. Economically priced for protection, storage and reuse. High Density Polyethylene. They're rustproof, dent-proof and scratch resistant. Folding handle. Customizable Kaizen pluck and pull foam insert for added versatility.

Folding handle. 1 latch. Protect tools and equipment with this rigid plastic carrying case. Textured exteriors resist dents, cracking and scuffs. High Density Polyethylene. Plastic hinge. Outer dimensions 17"x12"x3" / Inner Dimensions 16"x9-3/4"x2. This series offers lightweight blow molded polyethylene cases HDPE that are virtually unbreakable, tolerate high and low temperatures, and resist chemicals.

Blow Molded BudCase - Made in USA. Interior splits: 2. 125 base / 1. 375 lid inches. Interior dimensions 12 1/2" x 9" x 4 1/32". Flat layered foam cushion in the bottom and convoluted cushion in the lid.

More information about Cases By Source B753


Similar products:


CASEMATIX Portable Projector Carrying Hard Case with Customizable Foam Fits Sony Pico Mobile Projector MPCL1 , MPCD1 , MP-CD1 , MP-CL1A , MPCL1A

CASEMATIX FBA_HRDCS-LK-PP-1173-SNYML - Sliding-lock mechanism with holes to accommodate pad lock security. Folding handle. Protect tools and equipment with this rigid plastic carrying case. The #1 solution when you need a simple, rugged case. Fits sony pico mobile projector mp-cd1 / mpcd1 / mpcl1 / mp-cl1a / mpcl1a and accessories fits accessories such as Projector Stand Clip, USB Cable, HDMI Cable, Charging Adapter, Spare Battery Backup, Compact Speaker and more! Made in USA.

Interior dimensions 12 1/2" x 9" x 4 1/32". Easily fits devices and accessories with maximum dimensions: 11. 0" x 7. 25" x 2. 75" ; external Dimensions: 12. 0" x 9. 5" x 3. 5". Interior dimensions 12 1/2" x 9" x 4 1/32". The #1 solution when you need a simple, rugged case. High Density Polyethylene. Interior splits: 2. 19 base / 0

CASEMATIX Portable Projector Carrying Hard Case with Customizable Foam Fits Sony Pico Mobile Projector MPCL1 , MPCD1 , MP-CD1 , MP-CL1A , MPCL1A - 44 lid inches.

More information about CASEMATIX FBA_HRDCS-LK-PP-1173-SNYML


Similar products:


PFC 170-120-044-5SF Plastic Carrying Case, 17" x 12" x 4 3/8", Black

The Plastic Forming Company (PFC) 170-120-044-5SF - Why? because no other material even comes close when it comes to impact strength even in the coldest weather, resistance to solvents and oils and durability. Interior dimensions 16" x 11" x 4 1/32". High Density Polyethylene. The #1 solution when you need a simple, rugged case. Flat layered foam cushion in the bottom and convoluted cushion in the lid.

Interior dimensions 12 1/2" x 9" x 4 1/32". And pfc’s scratch resistant Mold-Tech exterior finishes will always look new, even after years of hard use. Pfc stock cases will never rust or corrode. Plastic hinge. 1 latch. Flat layered foam cushion in the bottom and convoluted cushion in the lid. Interior splits: 2.

PFC 170-120-044-5SF Plastic Carrying Case, 17" x 12" x 4 3/8", Black - 19 base / 044 lid inches. Pfc stock cases are the perfect solution when you need a simple, rugged carrying case. Great for storing and protecting portable sony mp-cd1 / mPCD1 / MP-CL1A / MPCL1 / MPCL1A Video Projectors and accessories. Hard exterior made of durable composite injection plastic.

More information about The Plastic Forming Company (PFC) 170-120-044-5SF


Similar products:


Blow Molded BudCase

Cases By Source B852 - Plastic hinge. The #1 solution when you need a simple, rugged case. 1 latch. This series offers lightweight blow molded polyethylene cases HDPE that are virtually unbreakable, tolerate high and low temperatures, and resist chemicals. Economically priced for protection, storage and reuse. Interior dimensions 12 1/2" x 9" x 4 1/32".

They're rustproof, dent-proof and scratch resistant. Flat layered foam cushion in the bottom and convoluted cushion in the lid. High Density Polyethylene. No Handle. High Density Polyethylene. Protect tools and equipment with this rigid plastic carrying case. Flat layered foam cushion in the bottom and convoluted cushion in the lid.

Blow Molded BudCase - Made in USA. Great for storing and protecting portable sony mp-cd1 / mPCD1 / MP-CL1A / MPCL1 / MPCL1A Video Projectors and accessories. Hard exterior made of durable composite injection plastic. Plastic hinge. Plastic hinge. Textured exteriors resist dents, cracking and scuffs.

More information about Cases By Source B852


Similar products:


12 x 11 x 6 Inches, Black - AmazonBasics Small Hard Camera Carrying Case

AmazonBasics WXD0584WD - Great for storing and protecting portable sony mp-cd1 / mPCD1 / MP-CL1A / MPCL1 / MPCL1A Video Projectors and accessories. Hard exterior made of durable composite injection plastic. Textured exteriors resist dents, cracking and scuffs. Interior splits: 1. 72 base / 05 lid inches. Pre-cut foam squares allow for customizing the interior; fold-down handle for easy carrying.

Textured exteriors resist dents, cracking and scuffs. High Density Polyethylene. Protection against impacts, drops, dings and dust. Customizable Kaizen pluck and pull foam insert for added versatility. Plastic hinge. Folding handle. High Density Polyethylene. Textured exteriors resist dents, cracking and scuffs. Made in USA.

12 x 11 x 6 Inches, Black - AmazonBasics Small Hard Camera Carrying Case - Made in the usa - fits sony mp-cd1 / mpcl1 / mpcd1 / mp-cl1a / mPCL1A mobile projector. Made in USA. Exterior measures 12. 1" x 10

More information about AmazonBasics WXD0584WD


Similar products:


Blow Molded BudCase

Cases By Source B963 - Textured exteriors resist dents, cracking and scuffs. Made in USA. Interior splits: 2. 125 base / 1. 375 lid inches. Domestic airlines and FAA's maximum size for carry-on bags. Flat layered foam cushion in the bottom and convoluted cushion in the lid. Textured exteriors resist dents, cracking and scuffs. Plastic hinge.

Folding handle. The #1 solution when you need a simple, rugged case. Interior splits: 2. 19 base / 044 lid inches. Textured exteriors resist dents, cracking and scuffs. Interior splits: 2. 125 base / 1. 375 lid inches. Pressure equalization valve creates an airtight and watertight seal; watertight at 1 meter for up to 30 minutes - IP67 rated independently tested.

Blow Molded BudCase - Outer dimensions 17"x12"x3" / Inner Dimensions 16"x9-3/4"x2. Economically priced for protection, storage and reuse. Backed by an amazonBasics 1-Year Limited Warranty. Made in USA. Easily fits devices and accessories with maximum dimensions: 11.

More information about Cases By Source B963


Similar products: