Tilta Camera Cage for BMPCC 4K – Basic Kit SSD Drive Holder Top Handle for BMPCC 4K Camera Tilta Gray

Tilta - The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup. Tilta bmpcc 4k cage ta-t01-b-g full camera cage ssd drive holder top handle for bmpcc 4k camera basic kit color tilta gray packing list: full camera cage for bmpcc 4k ssd drive holder for samsung t5 quick release top handle 90-degree USB-C Cable 20cm HDMI 90-Degree Adapter for BMPCC 4K Note:BMPCC Camera  is not included Full Camera Cage for BMPCC 4K Tilta Gray This "full" camera cage provides complete protective armor for the BMPCC 4K camera body while providing several 1/4"-20 and 3/8"-16 mounting points as well as three cold shoe mounting points.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations. Weight: 0756 lbs color: tilta grey material: aluminum-alloy, stainless steel Tilta camera cage ssd drive Holder Top Handle for BMPCC 4K. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

More information about Tilta

Tilta Lens Adapter Support Bracket for BMPCC 4K Camera Cages Tilta Gray TA-T01-LAS-G

Tilta - This bracket can attach to the front of the BMPCC 4K half and full camera cages to provide support for the various lens adapters that can be used with the camera. Packing list: 1 adapter mounting screw 1 lens adapter support bracket 2 cage mounting Screws for Lens Adapter Support Bracket 2 Allen Tools   Technical Data: Color: Tilta Gray Finish Material: Aluminum-Alloy, Stainless Steel Weight: 0

More information about Tilta


Similar products:


TILTA TA-BSP-15 15mm LWS Baseplate for BMPCC 4K Cage Blackmagic Pocket Cinema Camera 4K Rig Tilta Gray

Tilta - It provides 15mm lws rod holders to allow you attach rod-based accessories and is compatible with Tilta-standard dovetails. This 15mm lws baseplate easily slides onto the base of the half and full camera cages. It provides 15mm lws rod holders to allow you attach rod-based accessories and is compatible with Tilta-standard dovetails.

Weight: 0573 lbs color: tilta gray material: aluminum-alloy, stainless steel Rod System: 15mm LWS This 15mm lws baseplate easily slides onto the base of the half and full camera cages.

More information about Tilta


Similar products:


Tilta Half Sunhood for BMPCC 4K

Tilta Half Sunhood - Tilta half sunhood for BMPCC 4K. It provides 15mm lws rod holders to allow you attach rod-based accessories and is compatible with Tilta-standard dovetails. This 15mm lws baseplate easily slides onto the base of the half and full camera cages. The partial sunhood attaches directly to the back of the BMPCC 4K half and full camera cages to provide sunshade to your camera s LCD screen when shooting in bright exterior environments.

More information about Tilta Half Sunhood


Similar products:


Wasabi Power LP-E6, LP-E6N Battery 2-Pack and Dual Charger for Canon EOS 5D Mark II/III/IV, EOS 5DS, 5DS R, EOS 6D, 6D Mark II, EOS 7D, 7D Mark II, EOS 60D, 60Da, 70D, 80D, EOS R, XC10, XC15

Wasabi Power KIT-BB-LPE6 - Compatible with canon eos 5d mark ii, 6d mark ii, 5ds r, xc10, 7d mark ii, 5d mark IV, eos r, 5ds, 7d, 5d mark iii, 70d, 80d, 60d, 6d, 60da, XC15. All items include a 3-year manufacturer. Includes 2 batteries and 1 dual USB charger for the Canon LP-E6 so you always have the power you need. Batteries include premium grade-a cells rated at 7.

All items meet or exceed OEM standards and come with a 3-year manufacturer. 4v, 600ma x2; charger works with the Canon Original batteries. 2v, 2600mah for longer run-time and battery life; batteries work with the Canon Original charger. Charger replaces: canon LC-E6, LC-E6E, cbc-e6. Tilta half sunhood for BMPCC 4K.

Wasabi Power LP-E6, LP-E6N Battery 2-Pack and Dual Charger for Canon EOS 5D Mark II/III/IV, EOS 5DS, 5DS R, EOS 6D, 6D Mark II, EOS 7D, 7D Mark II, EOS 60D, 60Da, 70D, 80D, EOS R, XC10, XC15 - The wasabi power kit-bb-lpe6 includes 2 batteries and one dual USB charger. Charger input: 5v, 2000ma; charger output: 8. It provides 15mm lws rod holders to allow you attach rod-based accessories and is compatible with Tilta-standard dovetails. Eos 5d mark ii eos 5d mark iii eos 5d mark iv eos 5ds eos 5ds r eos 6d eos 6d mark ii eos 7d eos 7d mark ii eos 60D eos 60Da eos 70D eos 80D eos R xc10 xc15 This 15mm lws baseplate easily slides onto the base of the half and full camera cages.

More information about Wasabi Power KIT-BB-LPE6


Similar products:


SMALLRIG Camera Base Plate with Rod Rail Clamp for Sony FS7, for Sony A7 Series, for Canon C100/C300/C500, for Panasonic GH5-1674

SMALLRIG 1674 - Includes 2 batteries and 1 dual USB charger for the Canon LP-E6 so you always have the power you need. 2v, 2600mah for longer run-time and battery life; batteries work with the Canon Original charger. This low profile base plate is a simple and light base plate for the current popular cameras, such as for Sony FS7, sony A7 series, for Canon C100/C300/C500, for Panasonic GH3/GH4/GH5 etc.

4v, 600ma x2; charger works with the Canon Original batteries. Tilta half sunhood for BMPCC 4K. Batteries include premium grade-a cells rated at 7. 3. 2. 1. Compatible with canon eos 5d mark ii, 5ds, 5d mark iv, 5ds r, 6d, 70d, 5d mark iii, eos r, 80d, 60d, 60da, 7D Mark II, 6d mark ii, xc10, 7d, XC15. All items include a 3-year manufacturer.

SMALLRIG Camera Base Plate with Rod Rail Clamp for Sony FS7, for Sony A7 Series, for Canon C100/C300/C500, for Panasonic GH5-1674 - . The base plate features 15mm diameter and 60mm spaced rod holes, which enables the mounting of follow focus, matte box, lens support or other accessories. Compatibility: for sony fs7, for sony a7 series, for canon c100/c300/c500/c700package includes: 1 x base plate 1 x 1/4'' fixing screw 1 x 3/8'' fixing screw 2 x 1/4''-20 Screw 1 x Hex SpannerProduct Dimensions: 80x43x26 mmNet Weight: 171gPackage Size: 120x100x40mmMaterials: Aluminum Alloy This 15mm lws baseplate easily slides onto the base of the half and full camera cages.

It attaches to a camera with a 3/8"-16 or 1/4"-20 screw. The base plate features 15mm diameter and 60mm spaced rod holes that allows you to mount a follow focus, matte box, lens support or other accessories.

More information about SMALLRIG 1674


Similar products:


Blackmagic Design Pocket Cinema Camera 4K

Blackmagic Design CINECAMPOCHDMFT4K - Dual native iso of up to 25, 600 gives you fantastic low light performance. This low profile base plate is a simple and light base plate for the current popular cameras, sony A7 series, for Canon C100/C300/C500, such as for Sony FS7, for Panasonic GH3/GH4/GH5 etc. Charger input: 5v, 2000ma; charger output: 8.

0 cards. The black magic os is the world’s most advanced camera operating system. It provides 15mm lws rod holders to allow you attach rod-based accessories and is compatible with Tilta-standard dovetails. Includes 2 batteries and 1 dual USB charger for the Canon LP-E6 so you always have the power you need.

Blackmagic Design Pocket Cinema Camera 4K - Elegant design the pocket cinema camera 4k features a next generation design that makes it the world’s lightest, most portable, and durable full feature 4K digital film camera. Highly advanced with 3 different kinds of media to record from, UHS-II cards, this 4K camera lets you choose between standard SD cards, or Fast 2.

4k dki video recording at 60 fps / 13 stop Dynamic Range. Authorized black magic Design Dealer - Includes 12 Month Limited manufacturer's. Compatible with canon eos 5d mark ii, 7d mark ii, 5ds, eos r, 70d, 80d, 60da, 60d, 6d mark ii, 5D Mark IV, 5ds R, xc10, 6d, 7d, 5d mark iii, XC15. All items include a 3-year manufacturer.

More information about Blackmagic Design CINECAMPOCHDMFT4K


Similar products:


BOVKE 2-in-1 Carrying Case for Samsung T5 T3 T1 Portable 250GB 500GB 1TB 2TB SSD USB 3.1 Type C Hard Drive External Solid State Drives, Black

BOVKE - Includes 2 batteries and 1 dual USB charger for the Canon LP-E6 so you always have the power you need. Two smooth but strong 360 degree zippers for easy opening and closing. 2v, 2600mah for longer run-time and battery life; batteries work with the Canon Original charger. Tilta half sunhood for BMPCC 4K. 4k dki video recording at 60 fps / 13 stop Dynamic Range.

Internal dimension:4. 88 x 3. 27 x 098 inch. Carbon fiber composite build / Black magic operating system. Charger input: 5v, 2000ma; charger output: 8. It provides 15mm lws rod holders to allow you attach rod-based accessories and is compatible with Tilta-standard dovetails. Compatible with canon eos 5d mark ii, 80d, 7d mark ii, 60da, 6d mark ii, 60d, 5d Mark IV, 5ds, 6d, 7d, 5d mark iii, eos r, 70d, xc10, 5ds R, XC15.

BOVKE 2-in-1 Carrying Case for Samsung T5 T3 T1 Portable 250GB 500GB 1TB 2TB SSD USB 3.1 Type C Hard Drive External Solid State Drives, Black - All items include a 3-year manufacturer. Comes with comfortable hand strap to carry easily. Product dimensions: external dimensions: 6. 38 x 4. 37 x 1.

More information about BOVKE


Similar products:


Tilta TA-SRA-15-G 15mm Side Single Rod Holder for Tilta bmpcc 4k Camera Cage

Tilta - Authorized black magic Design Dealer - Includes 12 Month Limited manufacturer's. Color: Black. Case only: for travel and storage device and accessories are sold separately. Internal dimension:4. 88 x 3. 27 x 098 inch. Perfect fit: the cases is semi-waterproof, shockproof to protect your 2pcs Samsung T5 or T3 or T1 portable ssd usb 3.

0 external solid state drives. High quality materials: premium hard EVA, Shockproof soft lining interior. Super convenient: this portable case is lightweight and compact to fit in your bag or luggage. Weight: 128g / 0284 lbs. It attaches to a camera with a 3/8"-16 or 1/4"-20 screw. The base plate features 15mm diameter and 60mm spaced rod holes that allows you to mount a follow focus, matte box, lens support or other accessories.

Tilta TA-SRA-15-G 15mm Side Single Rod Holder for Tilta bmpcc 4k Camera Cage - It is specifically designed to keep the weight down and let the operator use the FS7's inbuilt shoulder pad, minimizing the amount of extra weight and gear needed for a rig. With 1/4''-20 & 3/8''-16 threads on bottom, this base plate can be attached to any tripod. Full-size 4/3 sensor/ 4096x2160 resolution.

4k dki video recording at 60 fps / 13 stop Dynamic Range. We offer a 100% full refund guarantee if the travel case has quality issues.

More information about Tilta


Similar products:


Wasabi Power LP-E6, LP-E6N 2 Batteries Battery for Canon EOS 5D Mark II, Mark III, Mark IV, 5DS, 5DS R, 6D, 60D, 60Da, 6D Mark II, 7D, 7D Mark II, 70D, 80D, R, XC10, XC15

Wasabi Power BTR-LPE6-2PK - Includes 2 batteries and 1 dual USB charger for the Canon LP-E6 so you always have the power you need. Batteries include premium grade-a cells rated at 7. Weight: 128g / 0284 lbs. Rated at 7. 2v with 2600mah for a longer run time than the Canon original. We offer a 100% full refund guarantee if the travel case has quality issues.

Rechargeable lithium-ion battery for Canon LP-E6. Compatible with canon eos 5d mark ii, eos r, 7d mark ii, 80d, 5d mark iv, 60d, 7d, 70d, 6d, 60da, 5ds R, xc10, 5ds, 5d mark iii, 6d mark ii, XC15. All items include a 3-year manufacturer. This low profile base plate is a simple and light base plate for the current popular cameras, for Canon C100/C300/C500, such as for Sony FS7, sony A7 series, for Panasonic GH3/GH4/GH5 etc.

Wasabi Power LP-E6, LP-E6N 2 Batteries Battery for Canon EOS 5D Mark II, Mark III, Mark IV, 5DS, 5DS R, 6D, 60D, 60Da, 6D Mark II, 7D, 7D Mark II, 70D, 80D, R, XC10, XC15 - Additionally, the wasabi power lp-e6 comes fully decoded, so it will display the remaining battery life and usage time and is compatible with the listed Canon cameras and chargers. It provides 15mm lws rod holders to allow you attach rod-based accessories and is compatible with Tilta-standard dovetails.

Authorized black magic Design Dealer - Includes 12 Month Limited manufacturer's. Color: Black. Case only: for travel and storage device and accessories are sold separately. Comes with comfortable hand strap to carry easily.

More information about Wasabi Power BTR-LPE6-2PK


Similar products:


Samsung T5 Portable SSD - Metallic Red - USB 3.1 External SSD MU-PA500R/WW - 500GB

Samsung MU-PA500R/WW - Batteries include premium grade-a cells rated at 7. Top to bottom metal design that fits in the palm of your hand. 5" touchscreen LCD / 4 built-in microphones. Compatible with the Canon camera and Canon charger. 4v, 600ma x2; charger works with the Canon Original batteries. It attaches to a camera with a 3/8"-16 or 1/4"-20 screw.

The base plate features 15mm diameter and 60mm spaced rod holes that allows you to mount a follow focus, matte box, lens support or other accessories. It is specifically designed to keep the weight down and let the operator use the FS7's inbuilt shoulder pad, minimizing the amount of extra weight and gear needed for a rig.

Samsung T5 Portable SSD - Metallic Red - USB 3.1 External SSD MU-PA500R/WW - 500GB - With 1/4''-20 & 3/8''-16 threads on bottom, this base plate can be attached to any tripod. Full-size 4/3 sensor/ 4096x2160 resolution. Its portable design, blazing fast transfer speeds of up to 540 MB/s, shock resistance, and secure encryption make it the best portable SSD on the market. Compatible with canon eos 5d mark ii, 5d mark iii, 7d mark ii, 5ds r, 80d, 5d mark IV, 5ds, 6d mark ii, 60da, 60d, 6d, 7d, xc10, 70d, eos r, XC15.

All items include a 3-year manufacturer. Comes with comfortable hand strap to carry easily. Product dimensions: external dimensions: 6. 38 x 4.

More information about Samsung MU-PA500R/WW


Similar products: